The rms value of the potential difference \(V\) shown in the figure is:

       

1.	\(\dfrac{V_{0}}{\sqrt{3}}\)	2.	\(V_{0}\)
3.	\(\dfrac{V_{0}}{\sqrt{2}}\)	4.	\(\dfrac{V_{0}}{2}\)

A light bulb and an inductor coil are connected to an AC source through a key as shown in the figure below. The key is closed and after some time an iron rod is inserted into the interior of the inductor. The glow of the light bulb:

An inductor of inductance \(L\), a capacitor of capacitance \(C\) and a resistor of resistance \(R\) are connected in series to an AC source of potential difference \(V\) volts as shown in Figure. The potential difference across \(L\), \(C\) and \(R\) is \(40~\text{V}\), \(10~\text{V}\) and \(40~\text{V}\), respectively. The amplitude of the current flowing through the \(LCR\) series circuit is \(10\sqrt{2}~\text{A}\). The impedance of the circuit will be:

The time required for a \(50\text{ Hz}\) sinusoidal alternating current to change its value from zero to the rms value will be:
1. \(1 . 5 \times 10^{- 2}~\text{s}\)

2. \(2 . 5 \times 10^{- 3}~\text{s}\)

3. \(10^{- 1}~\text{s} \)

4. \(10^{- 6}~\text{s}\)

At a hydroelectric power plant, the water pressure head is at a height of \(300\) m and the water flow available is \(100\) m³ s^-1. If the turbine generator efficiency is \(60\)%, the electric power available from the plant is:
(Take \(g=9.8\) m s^-2)
1. \(111.3\) MW
2. \(210\) MW
3. \(176.4\) MW
4. \(213.5\) MW